Senior Tech Team
Join Date: Feb 2005
Location: Long Island, N.Y.
Re: SBC Stepped Nose Cam in Early Block?
Time now to make an addition here.
We've been able to put together about 12 installation kits to get the thrust plates mounted in placed, 1/2 are full kits with ALL the tooling and the other 1/2 are partial's.
The full kits have a modified pre-drilled thrust plate, attaching screws, locating fixture, clamping tool, correct drill bit, 3-pc tap set, and correct countersink.
Partial kits have no tooling included.
I have a one or two set up's to do the Dart "Little-M" blocks also. This casting uses a different size front cam bore hole than the OEM castings.
Thanks, Gary in N.Y.
P.S. For anyone interested in the details/pricing please contact me with an e-mail (preferable) if possible.
Can get me at: [email protected]
Sept. 2019 Drag-Week Winner - N.Y. Legal Streeter - 1956 Chevy Bel-Air 7.23 @ 196+ @ 3800#
Best time to date-11/2019 7.00 @ 204+ @ 3800#