Lifetime Premium Member
Join Date: Sep 1998
Location: Ontario, Canada
These bullit mirrors are held together by two screws up through the base. These screws hold the base, bullit, and mirror together. There could very well be different bases for different door skin contours to keep the mirror horizontal. I just put a set back together for our '72 Lemans Sport........Sorry, not a Chevelle but it is a 400, 4 speed "A" body. Not all bad. If you got a mirror with a base that was a little off, a little grinding would probably fit it to your door contour.
[This message has been edited by Keith Tedford (edited 03-16-2002).]