Join Date: Aug 2019
Location: Vancouver British Columbia Canada
Re: Power Bucket Seat Mounting Bracket
First let me say thank you for the information re these seats and your patience with the questions.
After 30 years of being away from this it is tough to get one's head around things that in one's mind should just fit and work.
It is sometimes difficult to ask for advice and then not understand the advice given to you
I am guessing I forgot more than I took in as a younger man...LOL
The power seat assembly I am hoping to install is going to be for the Drivers side only.
The passenger will have the manual type so two different types of welded brackets.
The passenger side will be easy as I have the brackets and seat and will place them in in the correct location and mark and weld in as needed.
The drivers will be a little different. I do not have the tracks from the power bench seats as you sated that are used. I will go out on that limb and assume that is why the feet/mounting tabs look different.
I did contact Brett re my seat frame, prior to your post and he did confirm it was for a Chevelle. Thank you for his full contact info.
He said likely have to modify the seat mounting brackets that are welded to the floor.
Again thank you for pointing out the different tracks and sides , switches and the like.
1968 Malibu sport coupe to go with
my Barbie wife of the same year!
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Last edited by Capt Casey; Sep 2nd, 19 at 12:22 PM.
Reason: adding info