Team Chevelle banner

Choke cable routing

580 views 1 reply 2 participants last post by  Dean 
#1 ·
Probably not much love for a manual choke on a Holley carb.

I am looking for input how tight the bends should/could be for good function and on routing through firewall and placement inside for the pull knob end.
Thx,
D
 
#2 ·
I put mine on the left side of the steering column, maybe almost in the center.
You won't need to have it bend to short to affect its operation.

BTW, it works great on a Holley carburetor, pull it out all the way, a couple of pumps of the gas pedal, fire up then push it back in about half way, then after about thirty seconds of the engine running, push it back in.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top