Re: Ignition 101
Does anybody make a vacuum can for the MSD pro billet that starts at a lower vacuum rate than the one it comes with?
I tried hooking up my vac advance to full vac and couldn't get the idle to stabilize due to low vacuum at idle (8") Also, is adding vacuum advance sometjhing you would try on a 12.5:1 BB??
Re-read entire post!
406 SB, Original Bill Thomas '63 Rochester FI
AFR 210, Lunati 501C2LUN, 255/[email protected]
10:1, TH400, 3.31's, 4400 SS
"Life is too short to not run a solid roller cam."
"Nothing is impossible; if you don't know what you're talking about."