Not to sure if this is the right place for this post butg here goes anyway.
Regardless of whether anyone missed me or not I thought a short post as to why I have been absent from this site for the last 3 months.
Well this is how things went down.
It was April 12rh and the first day of one of my three day power production
seminars. About an hour and a half before the official 5 pm finish my partner - Marvin Burke - took me by the arm and said -" David, you are looking a bit peaky - go and lie down I will finish off today's presentation".
With that he lead me to the door and that was the last thing I remember before waking up strpped to an operating table snd being prepped for emergency brain surgery.
Turns out that for about 2 hours things could have gone either way. After the op I was in the IC unit for 21 days.
Well I am not so good at just lying still and relaxing even if I am in an IC unit.At a much lower level than either Steven Hawking or Albert Einstein I had to content myself with mental experiments. One of the things that I worked on for hours and hours was how to prove the effectiveness of my cam selection program makes it about the best there is. After a while I realized I could use some of the properties of 'quantum mechanics' to do this.
Since I am new to this site I don't suppose that many of you are aware that I have been working on an effective cam/engine build program TorqueMaster for over twenty years. Also in the last 5 years I have developed a a flow bench program that will school users to F1 level.
I have done a couple of videos that explain this flow program which can be seen at:-
for part 1 and:-
If there are any pro or semi pro head porters reading this PM me and I will send you a free copy.
Just for the record anyone attending the Race Engine Challenge in Charlotte as a spectator :-https://raceenginechallenge.com/
will get both the porting program and the cam selection program free.
OK guys enough typing here - my head is spinning!!