Re: BBC 6.135" rods that won't break the bank?
another thing is pressing the piston on the rod is no problem if you have the right equipment for the job like from sunnen. again no prob for good machinist
Yeah, the pin slides through the whole assembly. The issue is heating the rod end, there is no press force on the piston on installation. Taking it apart is a different story.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Best pass 8.87 at 150.98 1.212 60'. Sold 3/2018
1970 SS 396 project in progress. Bought 5/2018