Chevelle Parts at SS396.com
GROUND UP & SS396.com
Official Sponsor of Team Chevelle
|
|
Chevelle Parts at SS396.com GROUND UP & SS396.com Official Sponsor of Team Chevelle |
|
|
|
| Chevelle Tech Current Topic: Spindles | ||
Registered users (free) do not see these large ads | Brake Conversions Tech info on converting from drum to disc |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
Nov 21st, 99, 7:56 AM
|
|||
|
|||
Hello. Can anyone tell me the proper installation of the steering arms that attach to the back side of the spindles ? I forgot which side they belong on after I took the front end apart. The arm has a mild curve to it. Does it mount with the curve pointing towards the inside or outside ? It's a 1970 with disc brakes. Thanks for the help.
Steve 
|
|
#2
Nov 21st, 99, 8:14 AM
|
|||
|
|||
|
The curve goes to the inside, otherwise there would be interference between the steering arm and the spindle. Also, look for a '+' cast into the front of the arm. The '+' goes to the inside.
------------------ Bob Murray 66 Malibu Greenfield, Indiana (Indianapolis) TC Gold #49 Aces #01941 NCOA #20838
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
