Help installing Hurst roll control on 69 chevelle - Chevelle Tech
Chevelle Tech join team chevelle as a supporting member  
Chevelle Parts at      
GROUND UP &         
Official Sponsor of Team Chevelle

Auto Insurance is the premier Chevrolet Chevelle Forum on the internet. Registered Users do not see the above ads.
Brakes, Suspension & Steering Conversion questions & more.

Thread Tools Search this Thread Display Modes
Old Nov 9th, 09, 9:52 PM
crazy69 crazy69 is offline
Join Date: Jul 2009
Location: Antioch, Ca
Posts: 10
Default Help installing Hurst roll control on 69 chevelle

Hello fellow gearheads!
I am going to be installing a Hurst Roll Control on my 69 chevelle so I can lock the front brakes when at the strip. My car has disk on the front and drum out back. I would like some advice on the beat way to install this and some pictures would also be nice. The car has the perportioning valve under the master cylinder and then the main distribution block down on the frame. I just redid my rear brakes with praise dyno brakes ceramic matrix shoes and heavy duty spring kit and wheel cylinders and I don't want to burn them up during tire warm up. Any help and Pictures people can provide would be very helpful as this is my first time installing a line lock.

Reply With Quote Quick reply to this message
Sponsored Links
Old Nov 10th, 09, 2:38 PM
marks412 marks412 is offline
Tech Team
Join Date: Mar 2009
Location: Gilbert, AZ
Posts: 602
Default Re: Help installing Hurst roll control on 69 chevelle

I'm in the same situation as you crazy69. I hope someone has some input on this. Pics would be great.
Reply With Quote Quick reply to this message
Old Nov 10th, 09, 7:04 PM
71 RAT 71 RAT is offline
Tech Team
Join Date: Jan 2002
Location: Deerfield NH.
Posts: 225
Default Re: Help installing Hurst roll control on 69 chevelle

I think a 69 is similar to a 71. But, I use an aftermarket adjustable proportioning valve mounted under the car. There's a picture in my Showroom of the booster/master/cylinder/roll control. Maybe give you guys some ideas. I had it mounted on the firewall for years, the way the lines were routed looked kind on Micky Mouse! If you want to hide it, you could mount it lower.
71 SS 454 TH400 2.74 1st gear GV Overdrive 3.73 Gear SC&C Stage 11 QA1's 4 Wheel Baer Brakes AGR Box
83 K20 454 TH475 NP 205 Dana 60 Track Lok Detroit Locker Rear
58 Ford 821 Powermaster Loader Backhoe Restored Family Heirloom
Reply With Quote Quick reply to this message
Sponsored Links
Gear in this thread - Powered by O'Reilly Auto Parts
Chevelle Tech > Mechanical > Brakes, Suspension & Steering      Current Topic: Help installing Hurst roll control on 69 chevelle
Quick Reply

Register Now

In order to be able to post messages on the Chevelle Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address. Note, you will be sent a confirmation request to this address.
Email Address:
You do not have to be specific but it helps others answer your questions or offer parts.
Please select your insurance company (Optional)
First Name
It's always nice to know a name instead of Mrhot67ss
One last thing to do to slow down the spammers
Enter the first letter of this word: Chevelle


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 1:42 AM.

Is there a site like this for?    El Caminos Camaros Novas Impalas GTO Chevy Punch All Chevys

2009 Team Chevelle - AutoForums