1964 Chevelle with 2004r
I am in the process of swappping the stock driveshaft for an Aluminum one. In the process, I noticed that the tailshaft busshing had gone bad (witness marks on the yoke). Since the 2004r trans does not have a removal tail housing, I need some advice on how to remove/reinstall a new bushing (never done one before). Is there a special tool for doing this? Thank you for any advice you can give.
I am in the process of swappping the stock driveshaft for an Aluminum one. In the process, I noticed that the tailshaft busshing had gone bad (witness marks on the yoke). Since the 2004r trans does not have a removal tail housing, I need some advice on how to remove/reinstall a new bushing (never done one before). Is there a special tool for doing this? Thank you for any advice you can give.