![]() |
|
Chevelle Parts at SS396.com GROUND UP & SS396.com Official Sponsor of Team Chevelle |
|
||
| Chevelle Tech Current Topic: Vid of my 10.23 pass | ||
Registered users (free) do not see these large ads 
| Performance Our High Performance area |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
I edited some of the footage and put together a little clip.
http://videos.streetfire.net/video/8...95001c1349.htm
__________________
"..a true hotrodder wouldn't be content untill he had created a car so violent, so totally sick that the act of dropping the hammer would result in instant death. Anything less results in the need to go faster." Tony DeFeo NPB 9.55 at 138 |
|
#2
|
|||
|
|||
|
Cool,!!
I betcha somebody on this site is not gonna like the music with the video though.
|
|
#3
|
|||
|
|||
|
There is always "somebody". LOL
__________________
"..a true hotrodder wouldn't be content untill he had created a car so violent, so totally sick that the act of dropping the hammer would result in instant death. Anything less results in the need to go faster." Tony DeFeo NPB 9.55 at 138 |
|
#4
|
|||
|
|||
|
You can't hear my car over that supercharged Mustang anyway.
__________________
"..a true hotrodder wouldn't be content untill he had created a car so violent, so totally sick that the act of dropping the hammer would result in instant death. Anything less results in the need to go faster." Tony DeFeo NPB 9.55 at 138 |
|
#5
|
|||
|
|||
|
If my car ran and launched that well, then I could care less what was thought of the music. Good Job!!!!!!
__________________
John H 66 SS 468ci, 2 bolt main, 4 speed Muncie-21, Crane Mech. Special Cam intake 608/628 exh on 114 lobe separation, RPM Air Gap,Edl. 100cc heads, 950 HP carb,MSD 6-al. http://pic20.picturetrail.com/VOL130.../295356440.jpg http://www.youtube.com/watch?v=toP8BblBkxA |
|
#6
|
|||
|
|||
|
Nice... squirly off the launch.... wooo....
I approve! |
|
#7
|
|||
|
|||
|
You need to get some of that twist under control.
What is your rear suspension setup??
|
|
#8
|
|||
|
|||
|
Yeah squirrely
I like it
__________________
68 Camaro 427" E85 burning small block. 10.04 @ 132 on motor. Best 60' 1.358 |
|
#9
|
|||
|
|||
|
Looks good but a spring rate change/preload looks in order. What are you running for a rear suspension set- up...............I know somebody who would give his left one to make his launch like that!
__________________
71 Nova ....355, Nash 5spd. 9.73@138.20 1.30 60ft. some old videos http://www.youtube.com/watch?v=BO5-T_O9t0g http://www.youtube.com/watch?v=sUeSOeAtbIY |
|
#10
|
|||
|
|||
|
Is is just me or did he carry the left front tire about a 100ft.
The music is cool too.. |
|
#11
|
|||
|
|||
|
Nice!!!
__________________
Some of my cars: 1970 Chevelle SS454 LS6 12.55@108 MPH w/3.31 gears thru the exhaust short walk around video 1972 Buick GS 455 convertible I'd post a picture of my 87 Grand National,but they all look the same.. |
|
#12
|
|||
|
|||
|
Quote:
I thought I was going to hear rap or something, especially when I saw that the vid was on streetfire. Nothing wrong with a little metal. I liked it. In fact, I think the only thing that would be better would be just hearing the car itself with no soundtrack. |
|
#13
|
|||
|
|||
|
Quote:
Looky here>>> Music over Chevelle vidoes
|
|
#14
|
|||
|
|||
|
Very nice indeed!!
Mark
__________________
My 1965 Chevelle Proud member of ACES Member #3661 1965 Malibu SS 502 Powered 1968 Camaro 406/700R4 11.90/116mph 1972 SS Numbers Matching 402/400 1973 Camaro LT 1997 Tahoe 2dr Supercharged 2002 SS Camaro 2004 Mini Cooper S 2007 Corvette C6 |
|
#15
|
|||
|
|||
|
Rear setup is Morrison no hop bars, in middle hole, dbl. adj. uppers, stock boxed lowers w/urethane bushings, some old ass monroe shocks and stock type springs. I dont know the spring rate but it sits about right.
I know the car needs a lot of work to be right, but it's coming along slowly. As I said in another thread, it's been a long time to get this far and there is only 48 passes on this setup. My plan is to go with QA1 shocks, round tube lowers, weld in anti roll bar and some Hotchkis frame braces. I am suprised the tires are still holding as they were new in 2000, just been on jackstands most of the time. BTW this makes four (4) full 1/4 mile runs on the bottle. Now that the tuneup seems straightened out it's time to go to work on the rest of the car. Thanks for the props !!
__________________
"..a true hotrodder wouldn't be content untill he had created a car so violent, so totally sick that the act of dropping the hammer would result in instant death. Anything less results in the need to go faster." Tony DeFeo NPB 9.55 at 138 |
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| dual pass vs dual row | rmyers3 | Heating & Cooling | 2 | Jul 9th, 06 12:44 PM |
| 700R4 manual v-body - lost 3rd & 4th midway during best 1.478 60ft pass | caribbean | Transmission & Driveline | 2 | Apr 24th, 06 2:09 PM |
| front end has drivers side lean and pass side bushings creak? | hilljack | Brakes, Suspension & Steering | 6 | Nov 4th, 05 7:55 PM |
| 67 driver and pass power bucket seat tracks | Hotrod_Haven | Interiors | 3 | Feb 10th, 05 12:24 PM |
| Update on pass side oiling problem...You WONT believe this! | MY70Chevelle | 2002 | 13 | Nov 11th, 02 1:36 PM |