Man it's awesome to be able to be a part of dyno day with your new engine. I had this first time ever opportunity last friday. Helped hook up my 383 SBC to the dyno, watch the break in, and the half dozen or so pulls on it.
Thanks a ton to Carl at www.cncblocksnortheast.com for the expert machining and and assembly work, and for the fun day at the dyno shop.
Also a thumbs up to Patrick at Pro-systems for the awesome carburator, as Carl said "thats a nice piece"
Peak HP 455 @ 5400 RPM
TQ range was huge:422 ft lbs @ 2900 RPM and 437 ft lbs @ 5400 RPM, peak 501 ft lbs @ 4200 RPM.
Anybody see any problems with this?
Roger
Thanks a ton to Carl at www.cncblocksnortheast.com for the expert machining and and assembly work, and for the fun day at the dyno shop.
Also a thumbs up to Patrick at Pro-systems for the awesome carburator, as Carl said "thats a nice piece"
Peak HP 455 @ 5400 RPM
TQ range was huge:422 ft lbs @ 2900 RPM and 437 ft lbs @ 5400 RPM, peak 501 ft lbs @ 4200 RPM.
Anybody see any problems with this?
Roger