[Andy's Auto Repair]

Well? Its been a month....

[bowtieboy67]

So far ebay'd, pedal kit, GM fork/pivot ball, Speedo Cable adapter for tremec.

Ordered a Hay's billet flywheel/Centerforce Dual Friction Clutch.

Dont know if I mentioned it earlier, but I have a 403 bellhousing as well.

Hoping to have it pulled out of storage and into the shop early april, than its game on

[bowtieboy67]

Bam:





Got it pretty well finished except for a couple minor things.

Put a set of Poly bushings in the control arms, KYB shocks, Brake kit was from MBM. It was sure nice that the PO had put some MOOG ball joints in it as well :woot:

Had to re do the hard lines(it needed new ones anyway)/removed the original distribution block down on the frame. The only thing I dont like is how the one front brake line comes out of the proportioning valve.