Attaching fuel line Holley Dual Feed Carb line - Chevelle Tech
Chevelle Tech join team chevelle as a supporting member  
Chevelle Parts at SS396.com      
GROUND UP & SS396.com         
Official Sponsor of Team Chevelle
     

Auto Insurance

Chevelles.com is the premier Chevrolet Chevelle Forum on the internet. Registered Users do not see the above ads.
Engine AdvertisementGeneral Engine Discussion.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old May 1st, 13, 10:49 PM
sparky502 sparky502 is offline
Tech Team
Bob
 
Join Date: Mar 2007
Location: Alberta, Canada
Posts: 125
Default Attaching fuel line Holley Dual Feed Carb line

Would there be any cons if I attached to the fuel line from the tank to the rear port of the dual feed line. I was going to a run it along the firewall and attach a p-clamp to one of the studs for the heater core housing. The fender well is pretty much full with the MSD box and heater hoses.

__________________
1968 Chevelle SS-396

Gen Vi 450 hp 502

TH-400 B&M Holeshot 2800 stall, B&M shift kit

4:10 Posi 12 bolt
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old May 1st, 13, 11:18 PM
65 SS 65 SS is offline
Lifetime Premium Member
Ron
 
Join Date: Feb 2008
Location: So.Lake Tahoe CA.
Posts: 763
Default Re: Attaching fuel line Holley Dual Feed Carb line

Tell us more about the fuel supply system you have now. Is it an electric pump?

What's wrong with the way it is now?

One con might be race track inspections. I'm not positive, but they may not allow fuel lines attached to the firewall.

I'm not up to speed on a GenVi 502

Ron
__________________
Ron 65SS (Mine since 1976) -327C.I.-Autogear Muncie-Strange S60- My Showroom
Dyno video & first test drive
http://s259.photobucket.com/albums/hh317/ronstine/
327 by Wolfplace(429 H.P)
www.lewisracingengines.com
Paint and body
www.southsideautobodyrepairs.com
engine build thread
http://www.chevelles.com/forums/showthread.php?t=318062

Last edited by 65 SS; May 2nd, 13 at 12:11 AM.
Reply With Quote Quick reply to this message
  #3  
Old May 1st, 13, 11:24 PM
sparky502 sparky502 is offline
Tech Team
Bob
 
Join Date: Mar 2007
Location: Alberta, Canada
Posts: 125
Default Re: Attaching fuel line Holley Dual Feed Carb line

I have it just sitting there and not attached to anything as I am just plumbing it in. I have no real way to support it properly if I attach it to the fender well as it is crowded with the MSD box and heater hoses.

The GEN 6 502 has no provisions for a mechanical fuel pump so I am running a electric red Holley until it dies.


Sent from AutoGuide.com Free App
__________________
1968 Chevelle SS-396

Gen Vi 450 hp 502

TH-400 B&M Holeshot 2800 stall, B&M shift kit

4:10 Posi 12 bolt
Reply With Quote Quick reply to this message
  #4  
Old May 2nd, 13, 12:17 AM
65 SS 65 SS is offline
Lifetime Premium Member
Ron
 
Join Date: Feb 2008
Location: So.Lake Tahoe CA.
Posts: 763
Default Re: Attaching fuel line Holley Dual Feed Carb line

Just run the main line from the tank the original factory way. Continue it up to the line you have in your picture. It's not a heavy piece on line that needs that much support.

I don't like fuel lines on the fenderwell anyway.
..EDIT..
Click my showroom link, the first page has a picture-fuel pump to regulator-

Minus the pump, you'll see what I mean.
Ron
__________________
Ron 65SS (Mine since 1976) -327C.I.-Autogear Muncie-Strange S60- My Showroom
Dyno video & first test drive
http://s259.photobucket.com/albums/hh317/ronstine/
327 by Wolfplace(429 H.P)
www.lewisracingengines.com
Paint and body
www.southsideautobodyrepairs.com
engine build thread
http://www.chevelles.com/forums/showthread.php?t=318062
Reply With Quote Quick reply to this message
  #5  
Old May 2nd, 13, 9:25 PM
PA Camaro Guy PA Camaro Guy is offline
Tech Team
Brian
 
Join Date: Feb 2013
Location: Pennsylvania
Posts: 79
Default Re: Attaching fuel line Holley Dual Feed Carb line

Factory would have it secured against the inside frame rail (to protect from rocks and chips) until it met the front of the block for the mechanical pump mount. I'd go that path, then tuck your flexible line against the face of the block and perhaps behind your water pump to tidy things up and keep away from your belts. But as far as your idea- I'm not coming up with any reason why it would cause you a problem per se. I'd say the factory didn't do it that way because they had to be at the front for the mechanical pump. Your idea is creative.
Reply With Quote Quick reply to this message
  #6  
Old May 3rd, 13, 6:23 AM
ZZ69chevelle ZZ69chevelle is offline
Lifetime Premium Member
Steve
 
Join Date: Jan 2001
Location: Blandon PA
Posts: 2,950
Default Re: Attaching fuel line Holley Dual Feed Carb line

My truck had the lines plumbed to the rear of the engine along the firewall to feed the original TBI unit. I plumbed it the way you are wanting to do and it works fine. It doesn't care what direction it gets fed from. It looks cleaner too.
__________________
Steve B. 69 Malibu, 88 Camaro, 89 K1500 Z71 Stepside, 93 Z28, 97 Z28, 05 2500HD 4x4.
Reply With Quote Quick reply to this message
  #7  
Old May 4th, 13, 2:18 PM
sparky502 sparky502 is offline
Tech Team
Bob
 
Join Date: Mar 2007
Location: Alberta, Canada
Posts: 125
Default Re: Attaching fuel line Holley Dual Feed Carb line

Just an update. I pulled out the original corroded fuel line and looking at it the piece that enters the front sub frame was pretty much a straight line. I took the 3/8 steel line and fished it through the factory location and routed it all the way back to where I am mounting the electric fuel pump just in front of the lower control arm mounting bracket. Turned out pretty good.
__________________
1968 Chevelle SS-396

Gen Vi 450 hp 502

TH-400 B&M Holeshot 2800 stall, B&M shift kit

4:10 Posi 12 bolt
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply
Chevelle Tech > Mechanical > Engine      Current Topic: Attaching fuel line Holley Dual Feed Carb line
Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Chevelle Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address. Note, you will be sent a confirmation request to this address.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 5:35 AM.


Is there a site like this for?    El Caminos Camaros Novas Impalas GTO Chevy Punch All Chevys

2009 Team Chevelle - AutoForums