[tomzombie]

I got a good deal on a 10 bolt posi for my 67 chevelle i was told it came out of a late 60's camaro and i found out that it doesnt bolt up the same.So i was wondering if i could swap out the insides with my 10 bolt non posi and what exactly would i have to do.Thanks Tom

[Mike]

First things first.
It would need to be the same series as your current one to work with your existing gear set.
What gear ratios do both have?

[big gear head]

If you are swaping all of the internal parts then yes they will work. You will have to set the pinion depth, bearing preload and backlash. If you have a '67 Chevelle rear end and this is a '67 to '69 Camaro rear end then the axles will also work. If you only want to swap the posi then you need to do what Mike said.