350 Piston I.D. needed--What is 8557 or B557? - Chevelle Tech
Chevelle Tech join team chevelle as a supporting member  
Chevelle Parts at SS396.com      
GROUND UP & SS396.com         
Official Sponsor of Team Chevelle
     

Auto Insurance

Chevelles.com is the premier Chevrolet Chevelle Forum on the internet. Registered Users do not see the above ads.
Performance Our High Performance area

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old Feb 23rd, 04, 10:55 PM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

I purchased a complete running 4bolt 350.
I yanked the heads and pan off.
I saw flat tops with 4 valve reliefs and a small circle in the middle of them.They also have arrows facing forward.I think they are either stock pistops or cheap rebuilders.

I saw the part number on the skirt.It looked like either 8557 or B557.

Anyone know what it is and what the "Advertised" compression is with 67cc heads?

I brought the thing to top dead center and layed a feeler gauge on the piston and roughly figured the deck height at .055.
I'm probably going to run a Fel-Pro .015 shim gasket.
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old Feb 24th, 04, 1:02 AM
Wolfplace Wolfplace is offline
Lifetime Premium Member
Mike
 
Join Date: Apr 2003
Location: Mendocino County, Northern CA
Posts: 11,964
Post

I believe you are right. Sounds like a stock .020 destroked Badger 557
__________________
Mike (Wolfplace)
VISIT US AT
+4axis CNC block machining+
================================
Welcome to the internet,,, "Experts" made daily
===
"Life is tough.,, Life is even tougher if you're stupid."
----John Wayne----

Reply With Quote Quick reply to this message
  #3  
Old Feb 24th, 04, 1:43 AM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

Destroked pistons???

What the [img]graemlins/angry.gif[/img] is that?
Reply With Quote Quick reply to this message
  #4  
Old Feb 24th, 04, 1:50 AM
Wolfplace Wolfplace is offline
Lifetime Premium Member
Mike
 
Join Date: Apr 2003
Location: Mendocino County, Northern CA
Posts: 11,964
Post

That's what the rebuilder pistons that have the pin moved .020 are called
__________________
Mike (Wolfplace)
VISIT US AT
+4axis CNC block machining+
================================
Welcome to the internet,,, "Experts" made daily
===
"Life is tough.,, Life is even tougher if you're stupid."
----John Wayne----

Reply With Quote Quick reply to this message
  #5  
Old Feb 24th, 04, 1:52 AM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

So they lose a little cubes AND compression
Reply With Quote Quick reply to this message
  #6  
Old Feb 24th, 04, 2:02 AM
Wolfplace Wolfplace is offline
Lifetime Premium Member
Mike
 
Join Date: Apr 2003
Location: Mendocino County, Northern CA
Posts: 11,964
Post

No, this is just how they are described in the catalogs.
I don't have a clue why I guess it was someones idea of an easy way to tell you the pin was moved without simply saying the pin is moved up .020.
It is a 350 piston with the pin moved up just as they do in "stroker pistons" only some bright spark in advertising or what ever decided to give them a 'cute" name?
Why are we even discussing this, it's a piston with horrible quench with a stupid name designed to be put in a block that may have been decked.
__________________
Mike (Wolfplace)
VISIT US AT
+4axis CNC block machining+
================================
Welcome to the internet,,, "Experts" made daily
===
"Life is tough.,, Life is even tougher if you're stupid."
----John Wayne----

Reply With Quote Quick reply to this message
  #7  
Old Feb 24th, 04, 2:15 AM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

yea I know and ouch

I was planning on running this engine a little.
My friend told me it was a 350 4bolt with flat top's.

I thought I could find what the piston is ( ) and compute the compression and slap an appropriate stick in it.

I have looked online for this piston but I can't find any info.

I know this hurts (it hurts me more than you because I now own the damn thing ) but
could you help me figure what the compression might be?
Reply With Quote Quick reply to this message
  #8  
Old Feb 24th, 04, 2:31 AM
Wolfplace Wolfplace is offline
Lifetime Premium Member
Mike
 
Join Date: Apr 2003
Location: Mendocino County, Northern CA
Posts: 11,964
Post

Hey, all is not lost
You can get it to a smokin 8.4 with a .015 1094 felpro & 76cc heads or better, 9.5 with some 64cc vortecs
This is assuming they are really .055 down which is .010 further than they should be unless the rods got "destroked" .010 when they were done too

======EDIT============
9.2 with 67cc's
__________________
Mike (Wolfplace)
VISIT US AT
+4axis CNC block machining+
================================
Welcome to the internet,,, "Experts" made daily
===
"Life is tough.,, Life is even tougher if you're stupid."
----John Wayne----

Reply With Quote Quick reply to this message
  #9  
Old Feb 24th, 04, 2:38 AM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

Quote:
Originally posted by Wolfplace:
Hey, all is not lost
======EDIT============
9.2 with 67cc's
Uh... yea 9.2

Someone just shoot me [img]graemlins/clonk.gif[/img]

Gee I might get away with sticking an RV cam in it [img]graemlins/sad.gif[/img] [img]graemlins/boring.gif[/img]
Reply With Quote Quick reply to this message
  #10  
Old Feb 24th, 04, 2:46 AM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

Just a thought do you know of a cam that would work well with 9,2:1

World S/R Torkers 202/160 very mild bowl port,1 5/8 headers,RPM Manifold,

3.42's, th-350,2400 stall,and 3400 pounds???

May have to get me one of those Comp XE grinds.
Humm maby the
XE262H- 262 270 218 224 462 469 110
Reply With Quote Quick reply to this message
  #11  
Old Feb 24th, 04, 11:26 PM
thrasher thrasher is offline
Tech Team
Chris
 
Join Date: Nov 2002
Location: Up to my neck
Posts: 929
Post

Uh... Well...Someone did shoot me.

I rechecked the deck height after cleaning off some carbon and gasket material on the block and heads.

The result... .060 WTF!!!

It looks like the Fel-Pro .015 will bring my quench to a real sweet .075 [img]tongue.gif[/img]

It looks like I bought a rebuilder 350 4bolt with crank,rods,water pump,pulleys, and valve covers.

But hey at least it's a 4bolt with high nickel and high tin, it's also standard bore.
Reply With Quote Quick reply to this message
  #12  
Old Feb 25th, 04, 9:21 AM
travis g travis g is offline
Tech Team
 
Join Date: Feb 2001
Location: skiatook, ok
Posts: 438
Post

Don't feel bad. The engine in my truck has 9.4-1 with vortec heads, .040 deck height, and .038 head gaskets. Yeah, thats right...078 deck height But, I built the shortblock back before I knew much about quench. I use an XE268 (which would work great in your application BTW). I get 180psi cranking compression, run on 89 octane (87 in a pinch), and can burn the tires off of it from a 15mph roll with 3.08 gears and a 2000 stall convertor. It's not perfect, but it gets the job done.
__________________
'86 chevy 3/4 ton...9.4-1 355, vortec heads, vortec performer intake, 600 edelbrock, xe268, headers, duals w/turbo mufflers, BTO 700R4, 3.23 gears

'77 nova, 388, 200cc pro-toplines, holley 300-36, 750 edelbrock, comp 294s, 10" ATI, 3.73's

'83 ford F-150 XLT...351w, C-6 and 3.55's.
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply
Chevelle Tech > General Tech Area > Performance      Current Topic: 350 Piston I.D. needed--What is 8557 or B557?
Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Chevelle Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address. Note, you will be sent a confirmation request to this address.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 4:40 PM.


Is there a site like this for?    El Caminos Camaros Novas Impalas GTO Chevy Punch All Chevys

2009 Team Chevelle - AutoForums