hi, on my next rebuild i think im going to send my bushings & arms to you. i have been reading alot of your posts on bushings. i removed all front bushings and ball joints and ready to install the new pieces. i attempted to install the LCA bushings but it appears that the unboxed side of the arm is slightly bent/narrowed by 1/8"-1/4" (possibly from bushing removal). i didnt use a spacer like i should have. the question is: do i have to expand this gap to its original clearance before installing bushings or is this acceptable as long as the bushing are able to be pressed in and the complete arm is able to be installed into the frame?? what the best method to expand the gap to original shape?? Thanks, Sir!