just install the pedals. the Z bar brackets bolts to the frame with the 2 bolts, install the pivot ball into the block, mount the Z bar. The long rod goes from the clutch pedal to the top of the Z bar,then the short stubby rod goes from the bottom of the Z bar to the clutch fork. Just remember the Z bar is just a pivot point, when you get under the car, it gets pretty self explanitory. if you have any questions feel free to ask. Wait until the first time you row through the gears, its worth all the aggrevation. Dont forget to install the clutchfork before you install the tranny. also dont beat on the pilot bushing, I used some emery to clean out the pilot hole in the back of the crank. jim