I need the frame dimensions for a 70 chevelle that would include centerline and datum measurements. Our frame machine measuremenst cds dont go back that far. Ive looked through both the factory assmebly man and fisher body and found nothing. Anyone have these measurements? Thanks...Eric

------------------
1970 chevelle
1970 chevelle SS455 not a typo its a BUICK BABY
1949 and 1972 chevy trucks
http://briefcase.yahoo.com/bc/sevt_chevelles

Eric-

If you can wait till Monday, I can scan in the page from my GM Passenger Car Service Manual. It has a diagram of the frame with all sorts of measurements between mounting holes, width measurements from a datum line, etc... E-mail me if you need it. My manual is for a '72 Chevelle, but all 68-72 frames are the same so the info should be as well.



------------------
Gregg Haskin
72 Chevelle SS
71 Pro Touring Chevelle
ZZ502 Crated RATs in both
TEAM CHEVELLE #726 ACES #4486
“What the heck are all these extra nuts & bolts for?”

My 72 Chevelle SS Restoration Website: www.72ChevelleSS.com (http://www.72ChevelleSS.com)

My 71 Chevelle Pro-Touring restoration website: www.71protouringchevelle.com (http://www.71ProTouringChevelle.com)

Eric,
All of that data is in the Chassis Service Manual. I can scan and send to you also if needed. let me know. By the way, I have my convertible blocked up off the frame to start on the floor braces. What a mess!

Gary

------------------
GARY
71 SS 454
71 Malibu Convertible
T.C. Gold #56
ACES #2412
G.A.C.C. #027
www.chevelles.com/showroom/Gary1.jpg (http://www.chevelles.com/showroom/Gary1.jpg)

Gary,
That would be great if you could scan it as well. What did you decide on the olds convert? Let me know if ya need anymore help Gary...Eric

Gregg or Gary,

I would also be interested in a copy of this if you get it scanned in. Thanks.

------------------
R.J.
1972 Chevelle
TC Member #1525
RJ's website updated 12-1 (http://www.buffnet.net/~airrj/)
2003 Northern Chevelle Gathering (http://www.angelfire.com/folk/canam/page35.html)

<BLOCKQUOTE>quote:</font><HR>Originally posted by airrj:
Gregg or Gary,

I would also be interested in a copy of this if you get it scanned in. Thanks.

<HR></BLOCKQUOTE>

Be at your e-mail inbox in 30 seconds!



------------------
Gregg Haskin
72 Chevelle SS
71 Pro Touring Chevelle
ZZ502 Crated RATs in both
TEAM CHEVELLE #726 ACES #4486
“What the heck are all these extra nuts & bolts for?”

My 72 Chevelle SS Restoration Website: www.72ChevelleSS.com (http://www.72ChevelleSS.com)

My 71 Chevelle Pro-Touring restoration website: www.71protouringchevelle.com (http://www.71ProTouringChevelle.com)

Wow, your good!

Thanks. Gregg.

Could you please email me a copy of this please I am going to try and draw this up on the computer. Please email to ishee1@aol.com
Thanks
Michael

Guys can I get a copy too. I want to draw it out on pro-engineer cad software and see what I can make off of it. Gary, when ya gonna work on the floor braces?, If you wouldnt mind I would like to be a garage lizard and watch cause i got one that could use them too. I would help also if you needed it. I am pretty close to ya. Drop me an email if it would work out sometime.

Andy

Mike & Andy-

You have mail!

------------------
Gregg Haskin
72 Chevelle SS
71 Pro Touring Chevelle
ZZ502 Crated RATs in both
TEAM CHEVELLE #726 ACES #4486
“What the heck are all these extra nuts & bolts for?”

My 72 Chevelle SS Restoration Website: www.72ChevelleSS.com (http://www.72ChevelleSS.com)

My 71 Chevelle Pro-Touring restoration website: www.71protouringchevelle.com (http://www.71ProTouringChevelle.com)

ttt