Inspecting my lifters for my Comp 294S cam and noticed a few are concave on the bottom and a couple have a very small amount of pitting.The camshaft looks excellent.Go back with the Comp.s or is there something else that you guys prefer to run?

I had a Comp 294S and found 2 lifters that were concave. I set up my dial indicator and found that 1 lobe was worn .003 less lift and the other was .008 less lift compared to the other lobes. The cam looked good to me too. It was just starting to go bad.
I went with a billet solid roller and Crower severe duty roller lifters with the hippo option.
Don't chance it get the cam checked.

Allready going to,haven't done it yet.If it doesn't check out I'll just get cam and lifters.

isky red zones all day long