I am restoring a '65 Malibu SS and would like to be able to use 14 inch wheels some of the time with original hubcaps. Is there a code for the disc brake wheels that came on the '67 to 72 chvelles, and will they interchange? Any recommendation for which calipers to use. Thanks for any help.

To clear 14" wheels you will want the metric S-10 based setup sold through vendors like www.superiorspindles.com

Thomas

You can also get 14" disk brake wheels off of a later model car. Just make sure it has the same bolt pattern.

I went out to the local pick a part and got 14 inch wheels that fit fine with disk brakes. Just check them on some car in the yard to see if they rotate OK.

actually you can get 14 inch ralley wheels that look like the vette ralleys that will clear the discs, I think they were yz code but I'm not sure, I think they were off a 67 camaro Jim

I went out to the local pick a part and got 14 inch wheels that fit fine with disk brakes. Just check them on some car in the yard to see if they rotate OK.

Do you know which models have the right bolt pattern? I'm also looking to get a set.

any of your GM g body ( monte carlo, cutlass, regal etc) will have 5 on 4.75 pattern Jim

I kinda figured that. What about the 68 and up Novas?

I kinda figured that. What about the 68 and up Novas?

They are the same.

Google "wheel bolt pattern"

http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm


:thumbsup:

Thanks Dean. :waving: