ok, well i am getting scared from all the talk about rattle can primer. SO! i'm going to try to get a compresser and a cheap gun.
What sould i look for in a compresser?
what do i need in a gun? How do i set the gun? I'm going to clear out a spot in my garage (after talking to the wife and moving her stuff downstares) do i need to prime all spots when done each day? (indoor?)
or if its not getting wet i can wait a week or so?

thanks for all the help!
scottie

"Rattle Can Primer?"

What is that?

Compressor=s Gravity Feed Gun=s

"The Only Way!




------------------
Team Members Forever #341

Richard, Judy, MAXX2

'69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi.