I need to find fenders and doors for my 64 wagon one front and one back door as well as fenders so if anyone can tell me what swaps over and where to buy the stuff I would greatly appreciate it thank you, CHAD

Well..
I don't know about 64..
But my 72 4 door has the same fenders as the 72 coupe does.
The doors on the wagon fit the 4 door.. (I think... 80% positive..)

So.. The Wagons fenders only interchange with other wagons and other el-caminos fenders only... (I am sure about that from 70-72.. mybe 64 is diffrent)

Hope this helps.

------------------
1972 Chevelle Malibu custom 4dr (http://www.chevelles.com/showroom/chaosmalibu1.jpg)
Restoration started: February 10th 2001
Pic 1 (http://www.chevelles.com/showroom/chaosmalibu2.jpg) , Pic 2 (http://www.chevelles.com/showroom/chaosmalibu3.jpg) , Pic 3 (http://www.chevelles.com/showroom/chaosmalibu4.jpg) and Pic 4 (http://www.chevelles.com/showroom/chaosmalibu5.jpg)
TC member #1278

Chad;

I've got a 64 two door wagon and here is what I believe to be the situation.

It seems that the hinges are different between the 64 and 65's. As a result, where the hinge bolts to the door is different. This means that you can't use 65 doors.

Check out doors from a 64 4 door sedan.

Another thing that may be of interest; when I got my wagon, the front end body work was trash. I managed to locate a 65 front clip (fenders, hood, grill, etc) and installed it. You have to do the complete swap and can't just use one of the items!



------------------
Wes. Vann
Technical Reference section
Gold Member #5

Watch out, the rear doors have a more angular window frame compared to the 4-dr. (which is slightly more rounded). You could probably swap the window frames & glass if you are prepared to disassemble the doors & swap the window frames & glass. Just be aware that there is a slight difference.