Folks, a simple question here, can a second coat (layer) of por-15 fill putty be used? If so how long of time between coats? I read the instruction sheet no less than three times and I failed to find this bit of information. Thanks for any help that can be provided.

Jesse Robertson

------------------
Jesse66orig (http://www.chevelles.com/showroom/Jesse66orig.jpg)
Jesse66interior (http://www.chevelles.com/showroom/Jesse66interior.jpg)
T/C Gold 243
ACES 02344

It is an epoxy based product and should be fine for a 2nd layer. Lightly sand the first layer first........

------------------
Redrum (or Mike)

68 Corvette - 383 CI, 427 HP, 700R4, 12.56 @ 108 MPH
69 SS Chevelle - 502 CI, 610 HP, 2004R, 1320 unknown
97 Z-28 - totally stock still under 14,000 miles

"Oh, you hate your job? Why didn't you say so? There's a support group for that. It's called EVERYBODY, and they meet at the bar."
*Drew Carey

"DITTO!"


------------------
Team Members Forever #341

Richard, Judy, MAXX2

'69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi.

Thanks Mike and Richard for the help. I do appreciate it.

Jesse

------------------
Jesse66orig (http://www.chevelles.com/showroom/Jesse66orig.jpg)
Jesse66interior (http://www.chevelles.com/showroom/Jesse66interior.jpg)
T/C Gold 243
ACES 02344