The subject says it all. I just installed the Z-bar. I'm going to be ordering a nice new Rockcrusher in the coming days. 2 questions. Is there supposed to be one of those white bushings on the ball located on the engine side of the z-bar? Second question is, clutch pedal linkage I bought came with 2 springs. 1 goes from the clutch fork to the frame. Where does the other go? I can't for the life of me figure this out.

Thanks folks!

Mine has a spring from the clutch fork to the lower arm of the z-bar and the other goes from the upper arm to a bracket on the firewall. i don't rmember a plastic sleeve on the engine side, but there is one on the side that mounts to the bracket on the frame. Hope this helps.

Thanks for the information. Looks like I have to find a way to mount the spring from the pedal side of the z-bar to the firewall. If anyone has a picture that would be great. Thanks a bunch...