Hello gentlemen, and ladies if present, it is now time to turn my attention to the restoration of my beauty (which is in the eye of the beholder if you've seen my pics). The engine is complete, and I will be firing it up in a week or so. Now I am going to spending a lot of time in this forum, asking dumb questions and being a general pain in tha a$$. So far I have taken the front end off down to the radiator core. I am ready to start the disassembly process for the resto. I will be needing much advise. I guess I need to start with all the peripheral stuff in the engine compartment, correct? Right now there is no engine or tranny. I'll take any advise on where to start. BTW, I already have lots zip lock baggies, labels and markers. I will document every step of the disassembly process with a digital camera. As always, TIA
Kevin

welcome and have fun!

Kev - I was where you are now about five years ago, and it'll be a good long time before I'm there again!!!