Not sure which forum to post this in, so here it is. In proceeding with this conversion is the Auto brake pedal a bolt in? or is the mounting bracket/ bolt assembly different? Any advise would be greatly appreciated.

Thanks,
LB

The pedal is an easy swap in. There is a pin that holds in the clutch and brake pedal that has a clip which keeps it from coming out. Remove the pin for the master cylinder hookup and clutch linkage, remove the clip for the pedals' pin, and slide the pin out. Both pedals will come straight down. Install the single brake pedal with the pin, put the clip back on and hook up the brakes, all done. The single brake pedal has a spacer on it to take up the space where the clutch pedal was, so it is a pretty easy swap as long as you can get your hand up under the dash.

------------------
Dave
70 chevelle ss396 conv
66 chevelle ss396 hdp/conv
72 chevelle
TC member #493
Never forget Earnhardt!

just a note that the 67 pedal will not work in a 66 chevelle without modification.