I am wondering on whether to buy a 1 piece front clip for my car or just individual fiberglass pieces. Has anyone used a 1 piece before? I heard a lot about sagging and warping but wasnt really sure. Also, does anyone know about installing the lights and such? How difficult is it going to be? I also wanted to know what anyone thinks about using like a 88 corvettes hood latch and hinges. Any hints or advice on making this work out will be appriciated.

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
"Lets not race top-end."

I believe that the 1 piece is only the 1969 Chevelle front.

Check it out.

------------------
Shai

1972 Chevelle Malibu custom 4dr (http://72-chevelle.cjb.net)
Restoration started: February 10th 2001
TC member #1278

I think I have seen one for a 72. I will look around and double check though.

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, 3" exhaust with single chambler flowmasters dumped before the axle, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
"Lets not race top-end."

Go to www.usbody.com. (http://www.usbody.com.) You will find a 72 OPFE. One Piece Front End. www.hotrodsuperstore.com. (http://www.hotrodsuperstore.com.) www.showcars-bodyparts.com. (http://www.showcars-bodyparts.com.) I thought I had seen one.

------------------
1972 chevelle-bright orange
454-Lunati solid lift cam, performer rpm intake, long tube headers, 3" exhaust with single chambler flowmasters dumped before the axle, HEI iginition, fully race ported and polished heads with 2.3", 1.88" valves,
Turbo 350 tranny- redneck valve body, shift kit, 3300 stall
10 bolt rearend- 4:11 gears, minispool, c clip eliminators
Tubular LCA's w/ solid bushings.
15x10 Cragars ss wheels
p295/50s
"Lets not race top-end."

[This message has been edited by Fast Orange (edited 12-25-2001).]

Check out VFN, they make a real nice front clip for your car.

------------------
Mike Hurta
(Aug98)
Gold#25
Lake Jackson, Texas
www.chevelles.com/feature/aug98.html (http://www.chevelles.com/feature/aug98.html)