Guy's I was checking with my local chevy parts house here in Sac and he said he has Goodmark but they are NOT GM restoration. What are they then? Possibly from the first tooling or boot leg?? They where in a Goodmark Box.

the other place in Stockton says Goodmark and Dynacorn are the same thing.

I want to make sure I definatly get the Goodmark fenders and not some junk. It seems finding out who makes the body parts is similiar to who makes all the china cranks out there!

googmark and dynacorn are NOT the same. only get the new goodmark fenders or used gm.

Iam with Jeff, DII and goodmark are not the same fender!!! Ive had first hand experience with bioth fenders. The DII are cheap fenders, wavy, thin, very poor fitting. The goodmarks were great panels fit great, heavy, straight nice stuff. I just bought a pair of goodmarks(1970) this being my 2nd pair, both fit great, had no tweaking what so ever to make them fit, they just slide right on. The spots that needed any tweaking was where the corner light bolts on the bottom. The stamping was not perfect, fixed with some hammer and dolly work and 10 minutes later the light fit perfect. The next spot was where the ext bolted to the fender. When bolted on the ext didnt have a constat gap so I took some 180 grit on a block and smoothed out both the ext and fenders leading edge. Now that uneven gap is both due to the ext and fender, as NO TWO PARTS FIT THE SAME, Ive got roughly 4 pairs of exts and each one fits different.

If I were you I would find a goodmark dealer in your area listed on the goodmark website or call them up to find out you sells goodmark.

Oh by the way Ive got a few pics posted on my link below, check them out. Plus am getting ready to post a few more pics that I just took, hopefully better pics then whats on the link...Eric