|
RedSS454 Mar 25th, 05, 3:48 PM Is there anyway to look up what heads came on a motor? I am looking at a completely stock 454 whose casting number is 14015445. The casting date is E-22-82.Came out of an 82 4X4 (I guess a Suburban). Anyway what I am getting at is what heads came with this motor and would the be worth building for a hot rod BBC? Thanks, Chris Chevelle Dude Mar 25th, 05, 7:06 PM Hey, thats the same casting number as the block ive been looking at for $500. Id like to know mroe about it myself..All Ive found is that it says its a 78-90 motor.?.? Chevelle Dude Mar 25th, 05, 7:08 PM BTW, Stupid question, but where can I find the Casting date for my motor?? RedSS454 Mar 25th, 05, 7:43 PM BTW, Stupid question, but where can I find the Casting date for my motor?? The rear ledge if the block. Usually on the rear ledge passanger side, but some late model blocks have it on the driver side. Also, I have learned this here on TC, but the only 'stupid' question, is the one not asked (yea corny, but I find it true) Chris mr 4 speed Mar 25th, 05, 8:37 PM The shortblock would be perfect heads are peanut port for sure. RedSS454 Mar 26th, 05, 9:41 AM The shortblock would be perfect heads are peanut port for sure. Exactly what I was looking for. THanks Chris, Chris bradford Mar 26th, 05, 2:29 PM not necessarily peanut port. i bought a 454 out of a 4 door 1ton that had 781 heads. best to pull a valve cover. to be sure. on another note i have a 454 with 236 peanut ports that came out of a 75 monte. | ||