|
Caspr Sep 20th, 01, 7:33 AM We are getting ready to go to power brakes on our '69 and I wanted to try and find out something before we get to far into the installation. What is a recomended paint for the master cylinder. I am looking for something that will mainly just keep the thing looking good and hold up to the occasional spill or leak. chevl71 Sep 20th, 01, 8:43 AM I use primer and cast iron colored paint from the resto-suppliers. I've tried "rebuild cast" paint from a local parts house but is looked a little dead compared to the resto paints. I don't think they'll hold up to too much brake fluid since brake fluid is a good paint remover. So you'll still have to be careful when filling. ------------------ Doug, Chevl71 Team Chevelle member #625 Gateway Area Chevelle Club member CM028 (OO ss OO) chevl71 homepage (http://www.chevl71.homestead.com/chevl71homepage.html) micky69396 Sep 20th, 01, 9:49 AM We use DP-90 epoxy ------------------ Micky Hale Restorations 69 L-89 Chevelle 68 Biscayne 427/425 34 Plymouth Drag Car ACES #134 www.mickyhale.com (http://www.mickyhale.com) | ||