Looking for a place to get Holley hard parts. Holley site doesn't list what I'm looking for. Namely a new 30cc pump w/appropriate linkage, and some other misc hardware.

Vince

try www.quickfueltechnology.com (http://www.quickfueltechnology.com)

Hi Vince,

I looked in Holley catalog (dated 2000) and do not see a 30cc pump "kit". I see a list of 30cc parts. I typed 30cc as a search on SummtRacing and came up with list of Holley 30cc parts just as stated in the 2000 Holley catalog.

http://store.summitracing.com/default.asp?Ntt=30cc&Ntk=KeywordSearch&DDS=1&searchinresults=false&N=0&target=egnsearch.asp

I have a few 30cc pumps and will mail you one (no charge) if you want it. Coloring / finish is worn off, but a fine part. I can take a picture of the 30cc pump and send to you if you like.

Good luck....Joe

Hi Vince,

I looked in Holley catalog (dated 2000) and do not see a 30cc pump "kit". I see a list of 30cc parts. I typed 30cc as a search on SummtRacing and came up with list of Holley 30cc parts just as stated in the 2000 Holley catalog.

http://store.summitracing.com/default.asp?Ntt=30cc&Ntk=KeywordSearch&DDS=1&searchinresults=false&N=0&target=egnsearch.asp

I have a few 30cc pumps and will mail you one (no charge) if you want it. Coloring / finish is worn off, but a fine part. I can take a picture of the 30cc pump and send to you if you like.

Good luck....Joe

Joe,

The front pump has the 50cc kit on it. I think I need a different "arm" to allow a 30cc pump to work. I saw the 50cc kit at Summit/Jegs, but it has the "arm" for the back I think. What arm is used for the front.

I wonder if I should just try the 50cc pump and see how it works. I just don't know if the 50cc pump will hit my intake.

Can I see that pic?

Thanks for your help
Vince

Hi Vince,

I'll take a picture for you and email it to you. I have a 30cc arm too.

The 30cc pump arm is slightly small than the 50cc arm. The 50cc arm might work on a 30cc pump. I have never tried it.

The 50cc pumps usually require a 1/2 spacer under the carb to provide intake manifold clearance (unless you have a Victor Jr or some other open plenum where the carb sits high and no runners are under directly under the 50cc pump(s).

Keep in mind the 30 does not pump 30, or the 50 pump 50, when you step on the gas. 30 and 50 are their max capacity, and not the actual pump shot amount of fuel they deliver each time.

If you want to try the 50cc pump, I think it will work with some tuning. You can use a 30cc pump cam which will drive your 50cc pump to dump only 30cc pump worth of fuel. Should work OK.
....Joe

Hi Vince,

I have that picture of 30cc pump and parts for you. Drop me a line SS454JC @ optonline.net.

Happy Easter.....Joe