|
1968 hot rod Mar 20th, 05, 6:46 PM I have to replace valve seals on an 95 LT1,what is the Pioneer part # for this application? The seals I removed were banded rubber with a teflon insert. Thank you Wolfplace Mar 20th, 05, 8:27 PM I have to replace valve seals on an 95 LT1,what is the Pioneer part # for this application? The seals I removed were banded rubber with a teflon insert. Thank you = Sorry, I don't have a clue, I don't use those type of seals. I don't think those are the stock seals though so you probably should measure the top of the guide to see what size it is in diameter. Probably .530. BillK Mar 20th, 05, 9:10 PM hr, I would look them up in Fel Pro and just get the complete set. They are probably .560 od guides. I can try to remember to look up a number on Monday. Send me an e-mail Monday after 8 AM so I will get it at the shop. I do not think the oem ones had a teflon insert. 1968 hot rod Mar 20th, 05, 9:43 PM the guide is .530 Ø they are not stock seals . engineguy Mar 21st, 05, 1:41 PM Part number for this seal, Nitrile w/Teflon insert, .531" guide OD and .341" stem: Clevite #45739 PC #1711 | ||