I sprayed Dupont Nason 2k primer last week and while doing the second coat (second mix) noticed it going on a little different. (It was put on over blasted/etched metal)

It was after I did the second coat that I realized I mixed the first batch with too much activator. Using a mixing cup I took the activator to the 3 part line instead of the 2 part line.

It's been a few days and I haven't noticed anything wrong and I haven't sanded yet. Did I screw up the first coat with too much activator and need to re-strip? http://www.chevelles.com/forum/eek.gif Or can I keep rolling on the body work and paint?
Thanks
B~

------------------
~~~~~~~~~~~~~~~~
Brian
66 SS396 frame off WIP
"If things ain't going right, go back to sleep. Dreams will get ya there."

It will be fine. As long as there's hardener in it. Now if you skipped the hardener or put too little in.....That's a different story. Sand on!

Excellent!! Thanx Jimmy

------------------
~~~~~~~~~~~~~~~~
Brian
66 SS396 frame off WIP
"If things ain't going right, go back to sleep. Dreams will get ya there."