guys,is there a plug connecter on a 67 with a blinker tach for the blinker in the tach? Im sure there is, but does it come off the dash right blinker indicator wire?also will the blinker tach work with a mallory tach adapter,needed the adapter for the old sun super tach would work with the mallory 6a box--just askin--67rat

I mean the left blinker lead!!!!!
In other words where does the blinker lead in the tach hook up to the blinker lead in the car?--67rat

the edit time limit is to short here!!!!

According to the AIM (and assuming the blinker lead is the light blue wire in the tach harness?)
It appears as though the blue lead from the tach harness splices into the existing directional signal connector and standard harness wire is probably taped up. I have drawing from the AIM if you'd like me to send it to you. Just give me an address.

The gauge dash harness left blinker wire has a connector in the wire that allows the removal of the light so that the tach blinker lead can be attached. Here's a pic. (http://www.chevelles.com/showroom/temp67bnktacbkr.jpg)

ok dale and elree,I will check it out and see how mine is,didnt look yet ,I will wait till instal--thanks guys--67rat