Tom G
Jul 5th, 02, 1:19 AM
I just finished the bottom of my floor pans with one coat of por15 do i need another coat Is there any sense in puting two coats on. Not going to topoat it
|
: por 15 FO_FDYFO Jul 5th, 02, 9:08 AM why not? MAXX2 Jul 5th, 02, 9:46 AM We used 2 coats of POR-15 Silver on the floorboards, as you can apply a second coat before the first coat actually dries. Hope you used Marine Clean and Metal Ready first. Almost finished with the B-Quiet Brown Bread insulation/sound deadener. ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi. KATHY'S KLASSIC SHEVELLE Jul 5th, 02, 3:54 PM hey lvmaxx, where did you get the B quiet Brown bread sound deadener from? If it's cheaper than Dyna mat,then it's what I'm looking for. Thanks, Don http://www.chevelles.com/forum/cool.gif ................... 72 2dr coupe Original Owner Maryland Chevelle Club # 535 " My Prozac" [This message has been edited by KATHY'S KLASSIC SHEVELLE (edited 07-05-2002).] MAXX2 Jul 5th, 02, 7:00 PM Go to- b-quiet.com We ordered the 70 Sq. Ft. roll so that we could do the floor, the interior firewall, the back interior of the cab, and should have enough left (Plus pieces), to do the doors. We also ordered the BQ-2 liquid to spray inside the doors and inside the kick panel spaces. They offer a 5% discount over $200.00, and almost every Team Member on this site has recommended the B-Quiet Brown Bread. Hope this helps. ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi. KATHY'S KLASSIC SHEVELLE Jul 5th, 02, 9:41 PM LVMAXX, thanks for the info. I'll be starting to do the interior floor pans soon, so I'll probably go with the B-Quiet.I'll check out their site. Don http://www.chevelles.com/forum/cool.gif mykes68 Jul 6th, 02, 3:23 AM hey TOM G..how much por 15 did you use to cover the floor pan once.??im planning on doing this soon.. Tom G Jul 7th, 02, 11:19 AM It took a full quart to do the bottom of the floorpans and trunk pans.i did decide to topcoat it with chassis coat. | ||