I know all of you are probably saying good luck, but, I need to find a LR quarter panel for my 67 wagon. There are not any down in FL that I have found. I hope someone can help. At this point, I will take a used one if itsnt beat to death. Thanks a bunch.
Chuck

good luck!
you need to post this in the clasified section.
no wanted or selling ads allowed. just following orders. :D

I was mearly asking if anyone knew of a link or somewhere to find one. thanks

There is a 67 Buick sport wagon Ive been pickin on for a couple years out in a yard in No.Nevada. The tail light openings are a little different but could be made to work.The body is all there,with minimal rust.Kind of a long way from Fla though.. Email if you want more specifics.

;) just doin my job. graemlins/beers.gif

not 100% sure on 67's, but when I did my 65 Elky (wagon lenght 1/4s ) I used two skins from a car and used the top body line and arouinf the rear lamp area for welded seam locations.
and formed the wheel well opening and lowere rear 1/4 area by hand..

thanks for the info, I havent thought about using a elky 1/4, I know they are the same length, but will it go high enogh to get the lowr lip on the 1/4 glass, I can deal with the tail light opening modification. Thanks very much.