|
: edelbrock carb and kickdown cable feeblerboy May 8th, 04, 11:16 AM I have the 600 cfm electric choke performer series carb and i cannot figure out where the kickdown cable links up. Right now its the only thing keeping it from passing inspection! Can anyone fill me in as to where it goes or even better give me some pictures?? thanks fellas 17Again May 8th, 04, 12:14 PM Steve, I have a 750 manual choke, but I believe the kickdown is the same. Hope this helps-yellow sleeved cable. Rob http://www.chevelles.com/showroom/17Again/100_0929.JPG 67chevy2 May 8th, 04, 12:19 PM Steve; The stud goes in the lowest hole in the linkage,so when you throttle it,the cable pulls forward.I'm guessing you have a T-350 transmission.I'm using a 700r-4,but they're basically the same.I'll try to get a couple pics if needed. Steve 67chevy2 May 8th, 04, 12:22 PM Someone beat me to it.Good pic.That should do it. Steve feeblerboy May 8th, 04, 12:53 PM hey thanks alot fellas thats perfetion! graemlins/thumbsup.gif chevelle565 Jul 19th, 09, 12:49 AM I was wondering if any one had another picture, it looks as if this one has expired. this pic would really help me a lot thanks | ||