Alright guys im looking for what size bolts i need to bolt up the power steering pump,bracket, the works....anyone with any knowledge on this subject...

ANYONE???

On my '70 model all are coarse thread bolts. The cradle bracket uses (2) 7/16 x 1 inch bolts in the front and a 3/8 x 1" on the drivers side to mount it to the engine. Where the pump mounts to the cradle bracket, the front bolt is a 3/8 x 3/4" and the rear uses a stud and a 3/8" coarse nut. Depending on which stud you have you may need a 1/4 inch spacer. The adjustment bracket uses (2) 3/8 x 3/4" bolts to mount it to the pump and a 1/2 x 1" bolt at the water pump for adjustment. I hope this helps.

Jim

What Jim said. That's exactly what my 71 454 has.

thank you for all your help...im new to the site and i really appreciate it...i'll try to throw up some pics once i get a chance...later guys

An added note: The adjustment bracket also uses a 1/4 inch spacer between it and the pump on the lower bolt hole.

Jim