The rear of my 4 door is looking a little low and was wondering what springs will interchange or what springs I should ask for, all the parts stores around here are the pep boys type with computers that don't go back that far and the employees are usually people you wouldn't want to touch a bicycle let alone a car.
I don't mean to rant
Charlie

------------------

According to their catalog, Moog #6319 is what you need.

------------------
Fred Aldrich
Web Site: www.GeoCities.com/~69_chevelle (http://www.GeoCities.com/~69_chevelle)

Charlie, If you have a NAPA store they have catalogs that go back that far.

Charlie,(Sorry just realized I replied to Dave! I don't know where I got that one! http://www.chevelles.com/forum/redface.gif sorry!)
Even though Freds part number will certainly do. Most parts stores besides computers also have the spring code interchange(for lack of a better term) book and you could look up your model of car in there and it will list the part numbers for your exact vehicles.(the catalogs are put out by each company) At least my local Autozone has one.

------------------
Steve
64SS-327-4spd




[This message has been edited by Steve D 64 SS (edited 05-21-99).]

Is that spring a stock replacement, because I wouldn't mind if the suspension was a little stiffer than stock.

Try National Parts Depot,I just bougth a set for my 67 and they worked out fine they list reguler and h.d. NAPA also carrys them but
at a higher price
chevy 67