I am building a 1968 Chevelle and want the firewall to be completely free of everything except the Power Brake Booster. The car is stripped down to a shell. I am using the Vintage Air all-in-one setup and have taken out the entire factory A/C stuff and filled and smoothed the holes.

Now I want to relocate the wiper motor assembly off the firewall and smooth the rest of the firewall. I was thinking of using a small wiper motor and mounting it in the cowl area so it would be out of sight. Does anyone have any suggestions on the best way of doing this or the best type of motor to use??

Thanks for your help!!

I saw a yellow power coated camero where they moved the wiper into the drivers fender.
Click Here-The Midas Thing (http://www.hotrod.com/featuredvehicles/113_0309_cam/index1.html)

Detroit Speed & Engineering is coming out with new style motors sometime soon. They will look a lot bettter, but it will bolt in the original location. If you get a chance look at their website. They already make some for '67-'69 camaros. Good luck