Does anyone have any plans and/or detailed pics, or know of any links to some for fabbing up my own rotisserie?

I'd like to remove the body off of my Chevelle in the near future and would like to fab up my own rotisserie in the meantime.

Any info anyone can provide is greatly appreciated.

Thanks in Advance.

heres a site i had bookmarked http://www.prostreetcar.com/body_rotisserie.html I have not built it yet so I cant personaly say how well it worked,I have also collected several jpegs from other sites to incorporate some different ideas when I am ready to build it. I can email you some of them if you want

Here's some ideas. Do a search on this site. There are many refs.

http://www.whirlyjig.com/

http://www.uscartool.com/

Ask him.

http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi/topic/3/11840.html?

I made mine. IT works slick. Email me if you think you'd be interested. I can take some measurements...

Rotisserie1 (http://www.chevelles.com/showroom/Cam_Sweet/DCP_1787.JPG)

Rotisserie2 (http://www.chevelles.com/showroom/Cam_Sweet/DCP_1785.JPG)

Cam

Here's some more info at another forum:

http://www.camaros.net/cgi-bin/forum/ultimatebb.cgi?ubb=get_topic;f=3;t=002845#000000

Here's one I copied out of a magazine (http://macc.chevelles.net/rotator.htm)

The link that Dean has posted is what I used when I made mine for a my 66.
It works very well and was not hard to build.
There are pics in my showroom with the car on it.
(how do you get your pics copied here?)

upload them to a "showroom" and then include the link to them in your message. go to the Members Area for instructions on temporary showrooms.