I saw a stand in a post that was made out of wooden 2x4's. Does anybody know the measuements for the roll around body stand. It looks like you would put it near the edge right under door.
thanks

Don't know if that was mine you saw or not, but I built one for my 66 when I took the body off a year or so ago. Its made out of 2X4's and 4X4's and is really cheap and easy to build. I have pics of it on my website (www.ChevelleSS.com).

Basically I used the frame as a guide and put 4 - 3' 4X4's at each corner where the body mounts go and tied them together by 2X4's on the top and bottom all the way around. If you look at the pics it will explain it better. I then bought some 250lb rated wheels at Home Depot.

If you need any more info or pictures, let me know.

Corey



------------------
TC # 233
ACES # ?

71 307 Malibu
66 396 SS Project

Website: www.ChevelleSS.com (http://www.ChevelleSS.com)
Email: corey@chevelles.com