|
: Mounting Conv Body on Rotisserie duffner Jul 17th, 01, 6:40 PM Well I finally purchased an Accessible Systems AutoBody Rotisserie. Does anyone have experience on where to connect the body in the front and rear? Chuck did a convertible but the pictures don't show the back of the car too clearly. I've got the doors off, but braced with 4x4's to prevent body sag....thanks. Duff Daytona Jeff Jul 19th, 01, 2:29 PM Duff, I don't have experience with a rotisserie except for pig roasts. http://www.chevelles.com/forum/biggrin.gif I would contact the manufacturer for their recommendations. ------------------ TC #364 Aces #4309 Jeff's 69 (http://www.chevelles.com/showroom/daytonajeff1.jpg) smithyjc Jul 19th, 01, 5:25 PM I mounted my 65 convt. to my rotator by using the two front body bushing mounts and two rear body bushing mounts. I built the rotator, but it is similiar to the accessible systems ones. I also braced the car using tube steel and angle iron. I have pictures on the rotator, bracing and how I lifted the body on my website. smithy ------------------ http://home.centurytel.net/jcsmiths_65_chevelle/ | ||