jay
Dec 19th, 04, 11:53 PM
does anyone know if Edelbrock manufactures their own cams ? thanks , jay
|
Chuck Dec 20th, 04, 1:53 AM Yes they do. The Performer RPM cam kit. They are better known for manifolds and heads. it really depends on what you want to achieve. Check the Edelbrock.com web site. Chuck Chris R Dec 20th, 04, 2:06 AM Search the performance and mechanical forums. I have heard some bad things about Edelbrock cams. Chris. SS_Dave Dec 20th, 04, 3:02 PM I am running the edelbrock rpm intake and matched cam for BBC. I did have a lobe round off on a 8000 mile engine build. However, I have read in here of a lot of different cams loosing a lobe. JMO Dave mr 4 speed Dec 20th, 04, 3:43 PM The Edelbrock cams can be bought at much cheaper prices if you don't use Edelbrock part #'s Their SBC and BBC Performer cams are available for $79 as a cam/lifter kit at Summit,and the RPM and Performer cams are available at PAW They are just generic grinds that Edelbrock resells. Chirp08 Dec 20th, 04, 6:06 PM they aren't great for performance, sound awesome, but no low end, and can be out performed, my advice, look into the Voodoo cams. jay Dec 20th, 04, 9:14 PM I was just curious. On their sight they are advertising a hyd. roller for BBC .I figured they were having them built to spec. | ||