Hello. Can anyone tell me the proper installation of the steering arms that attach to the back side of the spindles ? I forgot which side they belong on after I took the front end apart. The arm has a mild curve to it. Does it mount with the curve pointing towards the inside or outside ? It's a 1970 with disc brakes. Thanks for the help.
Steve

The curve goes to the inside, otherwise there would be interference between the steering arm and the spindle. Also, look for a '+' cast into the front of the arm. The '+' goes to the inside.


------------------
Bob Murray 66 Malibu
Greenfield, Indiana (Indianapolis)
TC Gold #49
Aces #01941
NCOA #20838