I have removed body from frame of my 67 El Camino. Four bolts tiwsted off with two of them where the nuts are actually turning inside the body (these two are back by the tailgate). What is the best way to get to those nuts?

Cut a hole?

ANY input is appreciated!

Thank You.

Mike Beasley

Unfortunately thats probably your only option. If the nut spins out.. usually means there is rust damage too the brace holding it on.. you might be able too push it out of the way from underneath and put a new one in (bolt) but if you can't see whats going on in there your gonna have to go in http://www.chevelles.com/forum/frown.gif
Good Luck