Does anybody know if anyone is producing the chrome valve covers for a LS-6? I looked in last years Year One catalog but they didn't
have anything listed for the LS-6. Thanks Brian. http://www.chevelles.com/forum/smile.gif

------------------
Theres nothing like the rumble of a big block and the smell of burning rubber! Brian Henderson
1970 Red on Red LS6

Same ones as the 396/402.

------------------
Bob Von Kaenel
70 SS 54k orig miles
My car. (http://www.chevelles.com/showroom/barista70front.jpg)
The red interior. (http://www.chevelles.com/showroom/barista70interior2.jpg)
The engine. (http://www.chevelles.com/showroom/barista70engine.jpg)

Saw a set at Canfiels a couple of weeks ago. Of course, they were way rusty and dinged up. I knew thet were really from an LS6 tho, cuz they both had only one opening and both had Team Tonawanda stickers. Them 2 stickers is worth an extra 38 horses! http://www.chevelles.com/forum/biggrin.gif
John

------------------
TC# 958
'67 Elky 396/325 TH400
----------------------------
"Speed Costs Money -
How Fast Ya Wanna Go?"

One of the corvette dealers has them mabe paragon? If Cortez is out there he can tell you witch dealer he got his from

------------------
My cars (http://www.geocities.com/gdwrench64/carphotopg1.html)

fortunatly I had my originals, but I think crane corvettes has the right ones, they are in san diego I think,

Our sponser Ground Up sells them,along with Sunnit Racing and PAW sells 'em for $49.95.
The're all made by the same company,Trans Dapt,and the baffles will hit the rocker arms.

------------------
1970 Chevelle SS396/M20/4.10 My 70 SS396 (http://www.chevelles.com/showroom/mr4speed70SS1)
Engine pic (http://chevelles.com/showroom/mr4speed70SSengine2)
My Black Cherry 70 SS454 (http://www.chevelles.com/showroom/Photo0031.jpg) 13.74 @ 97.45/2.04 60 ft. with exhaust manifolds and 2.73's
1968 Oldsmobile Cutlass convertible
1985 Cadillac Eldorado
Chris Corwel,TC Member # 785
Member # 141 AMCA

Crane's Corvette sells nice ones but they're expensive. http://www.cranescorvette.com/corvette_valve_covers_427.htm Make sure that you scroll to the bottom of the page. http://www.chevelles.com/forum/biggrin.gif

Hi guys, thanks so much for your quick response. I will be contacting the people at crane corvette. I checked out your cars & they look awesome. I will try and post some of mine when its put back together.
Thanks again, Brian http://www.chevelles.com/forum/biggrin.gif

------------------
Theres nothing like the rumble of a big block and the smell of burning rubber! Brian Henderson
1970 Red on Red LS6

nice picture at bottom of cranes page. trans dapt covers look good but they don't have holders for temp sender wire.

Just as an FYI. The covers that YEARONE sells (expensive ones) are from Crane's Corvette in San Diego, CA. They are cheaper through YEARONE than trying to buy them direct through Crane's. Nice valve covers !!! And they will fit much better than both types I tried from Ground Up. But they cost at least 3 times as much, too.

Kent
'68 Malibu ZZ502/502 http://www.chevelles.com/forum/smile.gif
ACES #5102

I got a set for Aulsey's that was a complete kit with silver gaskets, reinforcements and TR bolts for about a hun. The quality was pretty good by comparison of some of the other stuff I've seen. Dave Crane is a little full of himself for my taste and his valve covers and smog stuff is in the stratosphere price wise in my opinion.