Anyone see any problems with this kit (parts or price).

Price:$264.50

Complete description of the parts in the rebuild kit.

"Front Pump"
New design front seal


"Clutches And Steels"
3 Alto Red Eagle intermediate clutches .098
3 Intermediate steels .068
5 Alto Red Eagle direct clutches .098
5 Direct steels .068
5 Borg Warner Forward clutches .098
5 Forward steels.068
5 Borg Warner low/reverse clutches .098
5 Low/reverse steels (Turbulator) .068

"Other"
New intermediate sprag race (heavy duty)
Complete set of heavy duty bushings including teflon extension
Set of thrust washers w/plastic output shaft pilot
Trans-Go Street/Strip Shift kit
Heavy duty red lined intermediate band (welded)
Dacron transmission filter
New intermediate sprag (NDH)
New low/reverse sprag (NDH)
New adjustable vacuum modulator
Complete paper & rubber set w/duraprene pan gasket
Set of sealing rings (teflon stator & cast iron accumulator rings)
New governor gear
New front pump & governor filter
4 piece case saver

Yes,
Sounds about right.

Who has it for that price?

I sell similar kits for about that price. Seems very complete which is the problem with most kits, not enough stuff for the home mechanic to do without a trip or two to aggrave a trans shop...

If you need any tech help, or have any questions email me.

Ditto what Jake stated. Other than maybe a few items in there would not really be needed 99% of the time unless the trans you are building has really been thrashed. That is about what I would agree that I would sell that list of parts at.

Thanks for the input. I ordered the kit from Pro built. They are at www.pro-built.net (http://www.pro-built.net)

I have tried to do this right the first time, have everything that is needed, so you won't have to do a search/drive/phone call for it, which can make a good day go "sour" quickly. I have been there, done that. Thanks for the "good housekeeping seal of approval".....

Yep,
Your in good hands.