Hi all,been awhile since i last logged in.I have a crossmember from a Buick Skylark and i havenīt been able to locate the rubber mounts and brackets,which mount to the frame.Does anyone know where to locate such brackets and mounts?
All suggestions appriciated.
Thanks
Halldor
Chevelle 1971
(still under construction)

what year skylark? The 72 and older werer like chevelles, with a steel mount on the frame and the rubber mounts on the engine. The rubber mounts should be available easily new, but the frame pieces you will have to get used. I actually do have a pair of the steel frame pieces off a 72 skylark that had a 350, they should be the same for 68-72. What pieces do you need? These would only be for a buick engine, other makes are different. I also have the steel frame pieces for cutlass.

Halldor,

I know what you are looking for. I have the same thing on my GTO. Try:

http://www.thepartsplaceinc.com

I think both the rubber gromets and the brakets are being reproduced. If not Joe at the Parts Place will probably have some used ones.

Andrew

Thanks,guys i forgot to mention,that the C-member is from a ī68.
HR